cobra

Cobra is a 1/12the gauge, structured graphics loop, offering performance combined with the enhanced aesthetics of colour contrast and modern design. Cobra tiles can be laid broadloom effect or 1/4 turn / tessellated for maximum versatility.

 

Specification:

 

Adhesive Recommendations:
Construction 1/12" Tufted Graphics Loop    tile
Pile Height 3.00mm   Permanent Bond F.Ball F3  
Pile Fibre 100% Solution Dyed Polypropylene Tackifier Bond F.Ball F41  
Pile Weight 700gms/m²   Vertical Bond F.Ball F66  
Tile Size 50cm x 50cm  

Recommended Maintenance:
* Regular vacuum cleaning using an upright industrial cleaner with driven brush.beater.
* Spot cleaning and general cleaning as necessary using a proprietary cleaner following the manufacturers instructuions.

Preventative Maintenance:-
* The use of Dirt Barrier matting is recommended in areas subjected to heavy soiling and/or wet traffic (i.e. entrances etc.)
* Where castor chairs are in use, castor chair mats must be used to protect the aesthetics of textile floorcoverings.

Shading:
* Light and dark areas due to uneven pile pressure, crushing, or fibre distortion are not production faults and are outwith the control of the manufacturer. The effect can be more apparent on some textures (i.e. velours) and can vary with fibre, colour, and traffic volume.

 

Total Weight 4,500 gms/m²  
Box 20 tiles (5 sq. mtrs.)  
Backing Mexphalte  
     
Performance:    
Grading Heavy Contract  
Castor Chair Test Pass A (DIN 54324)  
Flammability Low Radius (BS 4790 / BS 5287)
Wear Guarantee 10 Years